Leatherette Engraving Instructions - Engraves to Black

These settings are for laserable leatherette that engraves to black.

RECOMMENDED LASER RASTER SETTINGS:

35 watt DPI 600 Speed 90% Power 35%
60 watt DPI 600 Speed 100% Power 30%
80 watt TROTEC PPI 600 Speed 90% Power 74%

Note: The recommended settings above may need adjustments for best results.
Settings will vary depending on the brand watt and model.

TIPS FOR BEST RESULTS:
1. Focus right on the leatherette
2. Cleaning should not be necessary with leatherette products. However
if it is use a small amount of LA Awesome on a microfiber towel.
3. Confirm the position of your artwork by testing on a separate piece of leatherette or tape a clear piece of plastic onto the item.
4. Vector cut mask or plastic for placement guides


LASER VECTOR CUTTING SETTINGS:
35 watt: Speed 20% Power 35% 50Hz
60 watt: Speed 25% Power 25% 100Hz
120 watt: Speed 85% Power 35% 2000Hz
80 watt (TROTEC): Speed 65% Power 40% 2000 PPI